No products in the cart.
Uflow Fast OPEN-CLOSE Founatin Application Diaphargm Solenoid Valve 3/4 Inch 2/2 Way SS304 with Epoxy Moulded LED Coil
₹3,020.00 – ₹3,160.00 (-20%)
Features:
- Size : 3/4″BSP
- Coil Type : Epoxy Moulded Square Coil with LED DIN Connector
- Valve Type : 2/2 way Normally Closed Screwed End
- Body Material : SS304 (ASTM A351 Grade CF8)
- Pressure Range : 0.5 to 12 kg/cm2 (bar)
- Temperature (Media) : -30° C to 90° C
- Seal : Nitrile (NBR)
- Media : Suitable for Air, Water, Chemical, Gas
- Application : General Purpose and Fountain Application
- Other Specification / Data : Check the tabs given below for details
Description
Port | Refer technical data sheet (Available in BSP threading) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
End Connection | Screwed | ||||||||||
Body Material | SS ASTM A351 Grade CF8 | ||||||||||
Diaphragm |
|
||||||||||
Media Temp. | |||||||||||
Media | Air, Water, Chemical, Gas | ||||||||||
Main Features | Valve Opens and Closes Very Fast hence preferred for all musical fountain applications and other similar applications where quick on-off function is required. | ||||||||||
Operating Voltage |
|
||||||||||
Power Consumption | |||||||||||
Coil Features | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position or freely movable in between as require.. | ||||||||||
Other Coil Types | Metallic Round Coil with LED, Epoxy Moulded Coil with LED, IP-68 Weather Proof Coil, IP-67 Flame Proof Coil, Power Saver Coil | ||||||||||
Optional Feature | 90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces. | ||||||||||
Other Specification Data | Available on Request |
NOTE: Use of filter in the inlet port is recommended.
Dimensions
Model No. | Port Size | Diagram No | A | B | C | D | E | E1 |
---|---|---|---|---|---|---|---|---|
FCN38
|
3/4"
|
14.1
|
81
|
130
|
97.50
|
55
|
48
|
57
|
Technical Data
Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm² | Max. Operating Pressure Kg/cm² | Seal & Diaphragm Material | Flow Factor Kv m³ / hr |
---|---|---|---|---|---|---|---|
FCN38 | CF8 (SS304) | 3/4″ | 20 | 0.5 | 12 | NBR | 5 |
* Note – Body Material : CF8M (SS316) on request, Seal : EPDM / Viton on request